Russia, Chelyabinsk Region, Kusa, st. 3rd International, 1, housing 20

Upgraded machine for processing thin wood UPT-250M

We inform you about the release of the upgraded model of the machine for processing UPT-250M. This model is an improved version of the previous model of the UPT-250 machine.

Upgraded machine for processing thin wood UPT-250M

UPT-250M — designed for longitudinal sawing of low-grade wood with a diameter of 80 to 250 millimeters into high-quality edged sawn timber. The sections of the finished product can vary from 50 to 160 millimeters in width (set by the distance between the side mills) and from 20 to 160 millimeters in height (set by the number and distance between the horizontal discs), while the length of the workpiece can be from one to six meters. On the UPT-250M machine, two milling cutters are involved in sawing a log, which remove the lateral surfaces of the log. Further behind them are two blocks of horizontal discs, which cut the block prepared after the cutters into boards. At the exit from the machine, a finished horizontal pack of boards and two slabs are obtained.

 

Upgraded machine for processing thin wood UPT-250M Upgraded machine for processing thin wood UPT-250M Upgraded machine for processing thin wood UPT-250M
Upgraded machine for processing thin wood UPT-250M Upgraded machine for processing thin wood UPT-250M Upgraded machine for processing thin wood UPT-250M